Swell 백서

Swell

원문

bitpro가 원문에서 글자만 모은 내용이에요. 표·그림·수식은 빠지거나 깨질 수 있어요. 전체 9쪽 중 1쪽

# What is Swell Swell is a non-custodial staking protocol with a mission to deliver the world’s best liquid staking and restaking experience, simplify access to DeFi, while securing the future of Ethereum and restaking services.&#x20; With Swell, users are able to earn passive income by staking or restaking ETH to earn both blockchain rewards and restaked AVS rewards, and in return be provided with a yield-bearing liquid token (LST or LRT) to hold or participate in the wider DeFi ecosystem to earn additional yield. # Introduction Swell Labs was formed to build a liquid staking protocol to provide the holders of Ethereum (ETH) the means to earn yield through staking without the constraint of locking up capital. Swell’s mission is to create a more secure, decentralized and transparent financial future for the world that does not discriminate or censor economic freedom. The beginning of that journey for Swell starts with continuing to advance liquid staking as one of the fundamental building blocks of modern day decentralized finance (DeFi) that is composable and fully integrated with the Ethereum ecosystem. # Ethereum and proof-of-stake In September 2022, after years of research and development, Ethereum transitioned to the long awaited proof-of-stake consensus algorithm by performing a hard fork known as “The Merge”. This upgrade significantly lowered the energy consumption of securing the network via the economic participation of users validating the blockchain. This participation comes in the form of staking whereby users lock up a discrete amount of Ethereum (32 ETH) in order to participate in validating transactions and producing blocks. In return that user receives block rewards for participating in consensus, priority fees and maximum extractible value (MEV). # Liquid Staking # The problem The rise and prominence of large centralised entities leaves users with few alternatives to avoid the illiquid, custodial staking solutions they provide. These solutions also contribute to a highly centralised and concentrated staking environment that adds systemic risk to Ethereum. While Ethereum ‘[solo staking](https://ethereum.org/en/staking/solo/)’ is available and open to anyone, it comes with two very high barriers to entry for most users to participate; * The minimum economic value required to participate is 32 ETH per validator (at 2021 market peak was equivalent to over $100K) and requires that ETH to be locked up during staking. * The process of validating and producing blocks is very technical and requires infrastructure expertise to avoid penalties and slashing for misbehavior. This greatly reduces the participation rate of staking and in turn the security of the Ethereum network. And due to the lockup of ETH while staking, reduces its liquidity and utility as an asset to the average user. # swETH LST Liquid staking solves the problem by separating and delegating the responsibilities of ‘staking’ to users who are willing to economically participate (stakers) and to users willing to technically participate (node operators). Stakers deposit ETH to validators run by node operators who in return manage them with the engineering precision required to scale and maximize returns for both parties. Stakers are now able to stake any nominal amount under 32 ETH and in return for capital get a liquid transferrable token that represents their staked ETH and accrued staking rewards. This token can be used with the same utility as ETH in DeFi to be transferred, held as collateral to borrow and to provide liquidity while earning staking rewards. The reduction in the 32 ETH requirement dramatically increases the number and distribution of users that are able to participate in securing the Ethereum blockchain. # Liquid Restaking <br> # What is Restaking? EigenLayer envisions to be a marketplace of essential services (AVS's) that serve decentralised applications. The protocol allows the modularisation and delegation of the same consensus security that secures Ethereum to AVSs to enable decentralised trust to exist between an AVS and a decentralised application.&#x20; In order to do this users will have to "restake" their ETH into a validator that has their withdrawal address pointed to an EigenLayer address (an [EigenPod](https://docs.eigenlayer.xyz/overview/key-terms) address). \ \ However currently [native restaking](https://docs.eigenlayer.xyz/restaking-guides/restaking-user-guide/native-restaking/) is only available for users with 32 ETH and infrastructure expertise to run validators. Furthermore restaked ETH is locked in EigenLayer and that capital remains illiquid for the user. # rswETH LRT rswETH is an ERC-20 Liquid Restaking Token that provides liquidity for users who are wanting to "restake" their ETH into restaking protocols such as EigenLayer without requiring a 32 ETH minimum, operating a node or having their restaked ETH locked.\ \ Users who restake, pool their ETH into a restaking pool that is then designated to a set of professional node operators who run validators on their behalf for Beacon Chain rewards and in future, rewards for validating services of AVSs. <br> # Why Swell? Swell provides users with a non custodial means of liquid staking and restaking via a transferrable ERC-20 token (swETH & rswETH). The protocol aims to provide users with; 1. **Higher yields** Swell enables you to access both staking yields and DeFi opportunities from one single interface. Simply stake or restake your ETH, receive liquid swETH or rswETH to be used in the wider DeFi ecosystem. 2. **Lower fees** The average ETH staking APY sits at roughly 4%, which doesn't leave much room for staking providers to levy their own fees. Swell charges 10% staking fees, making it one of the lowest-cost staking options on the market.&#x20; 3. **No minimum stake** It costs 32 ETH to set up a validator node on Ethereum ⏤ a $50,000 sum that excludes billions of people from being able to stake independently.Swell cuts down this barrier to entry, enabling anyone to earn rewards by staking with only a few dollars worth of ETH. 4. **100% alignment with Ethereum** Liquid staking makes ETH easier to trade, and democratizes the staking process. But, the dominance of any single staking provider threatens to overturn Ethereum's key values of decentralization and censorship resistance. Swell believes in a dynamic liquid staking market that preserves the diversity and decentralization of Ethereum.&#x20; 5. **No technical knowledge needed** Staking independently requires steady electricity, stable internet, and a healthy dose of hopium that your validator setup won't fail — leaving you out of pocket due to slashing penalties.\ \ Swell strips away this technical complexity and streamlines the staking process, enabling you to get started in seconds through a clean and simple interface. 6. **Full self-custody** Staking on a centralized platform requires you to hand over your assets. And, as we've seen many times before, this can lead to total losses when platforms misuse customer funds and end up insolvent.\ \ Swell's self-custodial staking enables you to keep assets in your own wallet, and receive staking rewards without compromising on control. 7. **Security-first approach** Too many DeFi protocols have sacrificed security for the sake of growth.\ \ Swell takes the opposite approach; prioritizing security every step of the way with continuous auditing by leading blockchain security firms. 8. **Fully-vetted node operators** When things go wrong and node operators display harmful behavior, staked assets can be forfeited to the network.\ \ That's why Swell’s staking pool is managed by a vetted group of best-in-class professional node operators, that have the technical expertise and experience needed to avoid problems. 9. **Tax efficiency** Depending on your jurisdiction, staking may be a taxable event.\ \ In fact, you might even be taxed twice: first when you receive the crypto in your wallet (income tax), and then later when you sell the coins (capital gains tax).\ \ Furthermore, if you receive staking rewards in the form of a rebasing liquid staking token (where the number of tokens held increases daily to reflect staking yield) then you may have an additional tax liability.\ \ Swell's swETH and rswETH is not a rebasing token. Instead, it is a reward-bearing token, meaning that the value of the tokens increases to reflect the accumulated staking yield — avoiding the creation of potentially taxable transactions.Disclaimer: Swell does not provide tax, legal or accounting advice. 10. **Technical innovation** Swell is not simply another forked protocol, but has been built from the ground up to provide a superior staking experience.\ \ Looking ahead, we are committed to staying ahead of the curve, and continue to explore the latest Ethereum innovations. # swETH Liquid Staking <figure><img src="https://2957241090-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7UdE175zY4z4MFiWtgOF%2Fuploads%2FTPQgfuaL0jt76tKMDxVE%2FName%3DswETH.png?alt=media&amp;token=f0162cbf-a995-473b-8fe5-a0c8ee0cea83" alt=""><figcaption><p>swETH</p></figcaption></figure> # swETH v1.0 system design The Swell protocol serves the following primary functions to a variety of stakeholders; * Onboarding and registering validators for node operators * Staking for end users * Reward distribution for end users, node operators and the Swell DAO # Node operator set In the first iteration of the protocol Swell will be operating a permissioned group of professional node operators to provide the scale, reliability and yield to users in a competitive environment. The subsequent iterations will see the operator set expand and ultimately be permissionless with enough liquidity, stability and with risk mitigation technologies like DVT, in line with the protocol’s values. When a node operator is whitelisted their nominated address will be added to the node operator registry contract. After which the operator is then allowed to add validator keys to the contract to increase the staking capacity for users. <figure><img src="https://2957241090-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7UdE175zY4z4MFiWtgOF%2Fuploads%2FN4mvtpOdv3iq8e6dGxsG%2FNode%20Operator%20Flow.png?alt=media&amp;token=6d67c7dc-5fde-43c2-9e5e-2ae59d14bf78" alt=""><figcaption></figcaption></figure> {% hint style="info" %} Learn more about the current [Node Operator Set](/swell-staking/node-operator-set). {% endhint %} # Staking with swETH When a user stakes their ETH to the Swell `swETH contract`, the ETH equivalent in Swell’s liquid staking token swETH is minted to the user. The ETH in the `swETH contract` sent to the `Deposit manager contract` to be pooled until there is enough for at least a 32 ETH deposit . The next validator(s) in the registry contract is then selected via round robin and a deposit is made into the `Ethereum deposit contract` with a validator key(s). The validator is then in a queue to be activated in the consensus layer for the node operator to begin attesting transactions and proposing blocks. <figure><img src="https://2957241090-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7UdE175zY4z4MFiWtgOF%2Fuploads%2FCPzIBR0Ato7A7W1fldna%2Fimage.png?alt=media&amp;token=01af688b-3625-4919-b803-987c37b32b86" alt=""><figcaption></figcaption></figure> # swETH token swETH is an ERC-20 token that represents a user’s staked ETH in the Ethereum blockchain inclusive of any accrued rewards and penalties from the consensus layer, and MEV and ‘tips’ from the execution layer. The amount of swETH held will not change over a period of time but the underlying value of the token will increase as the rewards accrue on chain. The total gains will only be realized when the token is exchanged on the secondary market (ie. at a decentralized exchange) or when withdraws are allowed in the primary market after the Ethereum Shanghai upgrade. This is commonly referred to as a reward bearing token and the underlying value is tracked via an exchange rate. # Exchange rate The exchange rate on the swETH contract keeps track of the relative value of total ETH staked on the consensus layer including rewards vs the original amount of ETH that has been staked. <table><thead><tr><th width="157">Time</th><th width="126">Alice</th><th>Exchange rate (swETH to ETH)</th><th>ETH Blockchain</th></tr></thead><tbody><tr><td>Month 0</td><td>1 swETH</td><td>1:1.0</td><td>1 ETH</td></tr><tr><td>Month 1</td><td>1 swETH</td><td>1:1.1</td><td>1.1 ETH</td></tr><tr><td>Month 2</td><td>1 swETH</td><td>1:1.2</td><td>1.2 ETH</td></tr><tr><td>Month 3</td><td>1 swETH</td><td>1:1.3</td><td>1.3 ETH</td></tr></tbody></table> *Figure 1 - Example of a user holding swETH and the accrual of rewards over time and exchange rate. Please note that this is for illustrative purposes only and is not the actual rate.* The exchange rate is calculated in part by a Chainlink [proof-of-reserve](https://chain.link/proof-of-reserve) oracle that returns the ETH balance on the consensus layer on a daily basis. This is then used to calculate the amount of swETH to mint when staking and the amount of ETH to return to the user when unstaking from the blockchain. # Withdrawals swETH can be withdrawn at the primary market rate through the Swell app.\ \ Withdrawals are typically subject to waiting times of 1-7 days, with occasional delays of up to 12 days or more.\ \ The exact duration depends on: **Beacon chain exit queue time** Ethereum limits the amount of validators that can exit during each epoch. Exits above this limit are placed in a [queue](https://www.validatorqueue.com/), with waiting times varying from a few minutes to several days. **Validator sweep state** The process of sweeping validators for exits involves cycling through all eligible validators by index number. The more ETH that is staked globally, the more validators there are and the longer it takes to go through the queue.\ \ As Swell grew very quickly in a short period of time, a lot of validators were spun up in a concentrated range of numbers. The result is that withdrawal requests made just after the validators have been swept will only be processed when the sweep passes through this concentrated range of validators again, which can take up to 8.5 days as of March '24. If the window to exit is missed, then it is necessary to wait for all the validators to be swept again until there is another opportunity, creating longer waiting times. **Demand for staking and unstaking in Swell**\ \ Swell has a buffer of staking rewards and daily deposits allowing withdrawals to be made without the need to exit validators. Large withdrawal requests may exceed the buffer, potentially leading to longer queues for withdrawals.&#x20; ### Swapping on the secondary market To avoid waiting to withdraw, swETH holders can instead swap out in minutes on the secondary market using a DEX or aggregator.\ \ Be aware that the swap rate on the secondary market may differ from the primary market rate shown on the Swell app.\ \ Visit the [FAQ](/swell-staking/faqs) for answers to common questions about withdrawals. # Rewards and distribution Rewards from staking fall into two categories; **Consensus layer rewards** - this is the standard ETH issuance for validators attesting transactions and proposing blocks. This is ‘locked’ up and accrued with the ETH staked. **Execution layer rewards** - these include “tips” (priority fees) and maximum extractible value or “MEV”. # Liquid Staking rewards and fees Updated 14.07.2023 The following table details the current distribution of total rewards earned for all parties involved.&#x20; | Entity | Total rewards | | ------------------ | ------------- | | Staker | 90% | | Node Operator | 5% | | Swell DAO Treasury | 5% | | Total | 100% | <br> # Reward distribution For stakers the rewards earned from the consensus layer remains locked and as described [above](/swell-staking/sweth-liquid-staking/sweth-v1.0-system-design/rewards-and-distribution/liquid-staking-rewards-and-fees) this is reflected in the increasing exchange rate. The rewards from the execution layer are denominated in ETH and will be entirely restaked to effectively compound the rewards back into the staking pool. Both will be reflected appropriately in the exchange rate. # Applications of swETH Users that hold swETH will have several ways to utilize their staked ETH. **Exit staking** **-** Holders can exit their swETH positions by selling for ETH on a decentralized exchange to realize their gains via the Swell **exchange rate.** **Swell Vaults** - swETH holders can deposit their swETH in Swell’s in-protocol vaults to earn extra yield from liquidity mining. **Provide liquidity** - Holders can make use of external DeFi integrations of swETH to be a liquidity provider to earn extra yield in trading fees and liquidity mining incentives. **Lending** - Earn additional yield on lending/borrowing DeFi protocols by supplying swETH to be borrowed. **Borrow** - In addition to lending, swETH can be used as collateral to borrow assets from lending protocols. # Staker guide The following pages contain a set of "how to" guides for stakers # Connect your wallet Click on `Connect wallet` to begin. {% embed url="<https://www.loom.com/share/27d211d071d84f2e8fcbc843723fdda2>" %} **Supported wallets** * Metamask * Wallet Connect * Coinbase wallet # Stake your ETH Simply enter the ETH you want to stake, click `Stake` and approve the transaction in your wallet to receive your swETH.&#x20; {% hint style="info" %} While there is no minimum amount to stake just beware of the gas fees. {% endhint %} {% embed url="<https://www.loom.com/share/a707fd06bbed44a6932c68a19641e6fb>" %} # Confirm your transaction After your staking transaction is complete the swETH balance on the top right should now be updated and the confirmation success banner should show a link to view the transaction on Etherscan. {% embed url="<https://www.loom.com/share/56b1b0144a5448d58c70031cf4da469c>" %} # Add swETH token to wallet To add the swETH token to your wallet click in the menu icon on the top right and click `Add Token`.Confirm the action in your wallet and you'll now be able to see the swETH token amongst your wallet assets. {% embed url="<https://www.loom.com/share/afceaf813bcc40d3a0f677959d7a3cce>" %} # Withdraws How to withdraw swETH **1. Request to unstake**&#x20; Click on the arrow under ‘Stake’ in the Swell app and input the amount you wish to withdraw. <figure><img src="https://2957241090-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7UdE175zY4z4MFiWtgOF%2Fuploads%2FGdrMZ6j14Nnar8oIFDBl%2Funstake1.png?alt=media&amp;token=de3254f4-443d-4fe3-9a91-bd0e33c3f2c9" alt=""><figcaption></figcaption></figure> **2. Receive an unstake NFT** Each withdrawal request is represented by a swEXIT NFT, which is automatically minted for you when you make the request. <figure><img src="https://2957241090-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7UdE175zY4z4MFiWtgOF%2Fuploads%2FheTW00XTzPCsV8AsDtp8%2Funstakenft.png?alt=media&amp;token=cbbd168b-73c3-4d85-8513-d3b135a43995" alt=""><figcaption></figcaption></figure> **3. Wait for 1-7 days**&#x20; The time taken to unstake the underlying ETH from validators is usually 1-5 days, but can be up to 7 days or longer depending largely on the validator sweep state, beaon chain exit queue delay, and demand for staking and unstaking with Swell. **4. Claim your ETH** The swEXIT NFT is automatically burned when you claim your ETH. <figure><img src="https://2957241090-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7UdE175zY4z4MFiWtgOF%2Fuploads%2Fi6ILDkg4ddDmDnNBE1LA%2Funstake2.png?alt=media&amp;token=8fbf1109-b810-431b-8cb0-dea0cc6a3ee7" alt=""><figcaption></figc
프로젝트로 돌아가기