bitpro가 원문에서 글자만 모은 내용이에요. 표·그림·수식은 빠지거나 깨질 수 있어요. 전체 75쪽 중 2쪽
s have
already upgraded, and they update their behavior in sync, allowing the chain to continue without
any pauses.
There are multiple networks (owing to the existence of several test networks). Each network
has a different schedule for when each Revision is adopted. These schedules are tracked in
[ChainConfigs](#chainconfigs).
The node software is under active development, resulting in occasional [releases](/developer-essentials/changelog/releases).
Releases are rolled out to different networks at different schedules, and not all releases apply
to all networks.
### Revisions
Monad revisions are major behavioral changes to the protocol, as defined in
[`revision.h`](https://github.com/category-labs/monad/blob/main/category/vm/evm/monad/revision.h).
<div>
<table>
<thead>
<tr>
<th>Revision</th>
<th>Notes</th>
</tr>
</thead>
<tbody>
<tr>
<td><code>MONAD\_TEN</code></td>
<td>
<ul>
<li>\[[MIP-8](https://mips.monad.xyz/MIPs/MIP-8)] Page-ified storage state</li>
</ul>
</td>
</tr>
<tr>
<td><code>MONAD\_NINE</code></td>
<td>
<ul>
<li>\[[MIP-3](https://github.com/monad-crypto/MIPs/blob/main/MIPs/MIP-3.md)] Linear memory implementation</li>
<li>\[[MIP-4](https://github.com/monad-crypto/MIPs/blob/main/MIPs/MIP-4.md)] Reserve balance precompile</li>
<li>\[[MIP-5](https://github.com/monad-crypto/MIPs/blob/main/MIPs/MIP-5.md)] Activate Osaka fork EIPs: EIP-7823, EIP-7883, EIP-7939 (CLZ opcode)</li>
</ul>
</td>
</tr>
<tr>
<td><code>MONAD\_EIGHT</code></td>
<td>
<ul>
<li>[Reserve balance](/developer-essentials/reserve-balance) checks now use final state code hash</li>
<li>\[Staking] Reduce pagination on staking precompile inverse mappings (`precompile_get_delegations()` and `precompile_get_delegators()`) from 100 to 50</li>
</ul>
</td>
</tr>
<tr>
<td><code>MONAD\_SEVEN</code></td>
<td>
<ul>
<li>[Opcode pricing](/developer-essentials/opcode-pricing) implemented</li>
</ul>
</td>
</tr>
<tr>
<td><code>MONAD\_SIX</code></td>
<td>
<ul>
<li>EIP-2935 bugfix</li>
</ul>
</td>
</tr>
<tr>
<td><code>MONAD\_FIVE</code></td>
<td>
<ul>
<li>\[Staking] Lower `ACTIVE_VALIDATOR_STAKE` from `25,000,000 MON` to `10,000,000 MON`</li>
</ul>
</td>
</tr>
<tr>
<td><code>MONAD\_FOUR</code></td>
<td>
<ul>
<li>[Staking](/monad-arch/consensus/staking) goes live with the following parameters:<ul><li>`ACTIVE_VALIDATOR_STAKE = 25,000,000 MON`</li><li>`MIN_AUTH_ADDRESS_STAKE = 100,000 MON`</li></ul></li>
<li>[Reserve balance](/developer-essentials/reserve-balance)</li>
<li> [EIP-7702](/developer-essentials/eip-7702)</li>
<li>[Dynamic base fee](/developer-essentials/gas-pricing)</li>
<li>Min base fee [raised](/developer-essentials/gas-pricing) (50 MON-gwei -> 100 MON-gwei)</li>
<li>[Per-transaction gas limit](/developer-essentials/gas-pricing) of 30M gas</li>
<li>Block gas limit (150M -> 200M), i.e. gas per second 375Mgps -> 500Mgps</li>
<li>Enable [EIP-2935](https://eips.ethereum.org/EIPS/eip-2935) (extended historical block hashes)</li>
<li>Enable [EIP-7951](https://eips.ethereum.org/EIPS/eip-7951) (P256VERIFY precompile)</li>
<li>Enable [EIP-2537](https://eips.ethereum.org/EIPS/eip-2537) (BLS12-381 precompiles)</li>
<li>Raise max contract size for `CREATE`/`CREATE2` to 128 kb</li>
</ul>
</td>
</tr>
<tr>
<td><code>MONAD\_THREE</code></td>
<td><ul><li>[MonadBFT](/monad-arch/consensus/monad-bft) implemented</li> <li>Block time (500ms -> 400ms), i.e. gas per second 300Mgps -> 375Mgps</li></ul></td>
</tr>
<tr>
<td><code>MONAD\_TWO</code></td>
<td><ul><li>Raise max contract size for plain contract creation transactions (24.5kb -> 128 kb)</li></ul></td>
</tr>
<tr>
<td><code>MONAD\_ONE</code></td>
<td><ul><li>Block time (1s -> 500ms)</li> <li>Block gas limit (300M -> 150M); gas per second unchanged at 300Mgps</li> <li>Transactions [charged by gas limit](/developer-essentials/gas-pricing)</li></ul></td>
</tr>
</tbody>
</table>
</div>
### ChainConfigs
Each ChainConfig describes one network, including its history of upgrading to different Revisions.
The ChainConfigs are defined in
[`monad-chain-config/src/lib.rs`](https://github.com/category-labs/monad-bft/blob/master/monad-chain-config/src/lib.rs).
| ChainConfig | Notes |
| - | - |
| `mainnet` | Chain id 143 |
| `testnet` | Chain id 10143; see [releases](/developer-essentials/changelog/releases) |
| `devnet` | Chain id 20143 |
# Releases
Source: https://docs.monad.xyz/developer-essentials/changelog/releases
This page catalogues every notable release. Some releases target only specific networks.
<Note>
We group changes into
* protocol changes (generally requiring a new [Revision](/developer-essentials/changelog#revisions))
* generally tagged with **\[EVM]**, **\[Consensus]**, or **\[Network params]**
* RPC/SDK behavioral changes (generally tagged with **\[RPC]**)
* performance changes
* tagged based on the nature of the change as **\[EVM]**, **\[Consensus]**, or **\[RPC]**
* internal/node-ops changes (generally tagged as **\[Node ops]**)
</Note>
## v0.16.4
| Network | Date released | Comment |
| - | - | - |
| [`mainnet`](/developer-essentials/network-information) | N/A | |
| [`testnet`](/developer-essentials/testnet) | N/A | |
Tags or hashes:
* `monad-bft` (consensus): [tag `v0.16.4`](https://github.com/category-labs/monad-bft/releases/tag/v0.16.4) (`2a2bcc046`)
* `monad` (execution): [tag `v0.16.4`](https://github.com/category-labs/monad/releases/tag/v0.16.4) (`f6a86a1a4`)
#### Notable internal changes
* **\[Node ops]** Added `--snapshot-format` flag to choose the layout a snapshot dump writes.
* Ref: monad (execution) [PR #2566](https://github.com/category-labs/monad/pull/2566)
* **\[Node ops]** `monad-ledger-tail` now logs `gas_used` on each proposed block.
* Ref: [monad-bft PR #3271](https://github.com/category-labs/monad-bft/pull/3271)
***
## v0.16.3
| Network | Date released | Comment |
| - | - | - |
| [`mainnet`](/developer-essentials/network-information) | N/A | |
| [`testnet`](/developer-essentials/testnet) | N/A | |
Tags or hashes:
* `monad-bft` (consensus): [tag `v0.16.3`](https://github.com/category-labs/monad-bft/releases/tag/v0.16.3) (`d12edcbc0`)
* `monad` (execution): [tag `v0.16.3`](https://github.com/category-labs/monad/releases/tag/v0.16.3) (`c1594ff80`)
#### Highlights
* **State Archive nodes no longer pay 2x write amplification past MIP-8** — historical nodes commit only the page-encoded timeline after the fork, and reads route per requested block version. Archive nodes that skipped the v0.16.1 hot-fix need a one-time `monad-mpt --storage <path> --promote-secondary` after installing; see the [upgrade instructions](/node-ops/upgrade-instructions/v0.16.3).
* **Snapshot streams are versioned** — every stream carries an eight-byte header, so a format mismatch aborts loudly instead of misparsing.
* **Statesync protocol v0/v1 retired**, leaving a single implemented protocol version.
#### Notable RPC/SDK changes
* **\[RPC]** Storage encoding is routed by timeline past the MIP-8 cutoff. `TriedbEnv` tracks the migration phase and `primary_earliest`, so `get_storage_at` selects page or slot encoding according to the requested block version.
* Ref: [monad-bft PR #3238](https://github.com/category-labs/monad-bft/pull/3238), [monad (execution) PR #2529](https://github.com/category-labs/monad/pull/2529)
* **\[RPC]** Filter methods return `InvalidParams` for a malformed `eth` filter rather than an internal error.
* Ref: [monad-bft PR #3241](https://github.com/category-labs/monad-bft/pull/3241)
#### Notable robustness changes
* **\[Node ops]** Every snapshot stream (`eth_header`, `account`, `storage`, `code`) is opened with an eight-byte versioned header carrying a magic, version, kind and guard byte. An unrecognised version or a shard assembled from mismatched files aborts with a clear message instead of misparsing. Snapshots produced by this release cannot be read by earlier binaries.
* Ref: [monad (execution) PR #2463](https://github.com/category-labs/monad/pull/2463)
* **\[EVM]** Fixed a 32-byte over-read of the EVM output buffer in `mce`.
* Ref: [monad (execution) PR #2533](https://github.com/category-labs/monad/pull/2533)
* **\[EVM]** Fixed the leaf-on-branch hex-prefix in `VarLenMerkleCompute` and `RootVarLenMerkleCompute`, which diverged from the canonical Ethereum root for a branch node carrying both children and a value. Not reachable in production: every production variable-length trie is keyed by a prefix-free set, so no committed root was affected.
* Ref: [monad (execution) PR #2442](https://github.com/category-labs/monad/pull/2442)
* **\[Consensus]** `proposal_basics` now finalizes in order.
* Ref: [monad (execution) PR #2519](https://github.com/category-labs/monad/pull/2519)
* **\[EVM]** Bounded the push-immediate walk in `show_opcodes`.
* Ref: [monad (execution) PR #2534](https://github.com/category-labs/monad/pull/2534)
#### Notable performance changes
* **\[EVM]** P-256 curve parameters are cached per thread in `p256_verify_impl`.
* Ref: [monad (execution) PR #2525](https://github.com/category-labs/monad/pull/2525)
* **\[Node ops]** State Archive nodes commit only the page-encoded timeline past the MIP-8 fork, removing the 2x disk growth rate that dual-timeline committing caused in v0.16.1. The RODb secondary handle also shares the primary's service thread.
* Ref: [monad (execution) PR #2529](https://github.com/category-labs/monad/pull/2529)
#### Notable internal changes
* **\[Consensus]** Statesync protocol v0 and v1 are retired and the version constants are derived from execution's `statesync_version.h` through a new `monad-statesync-version` crate. `STATESYNC_VERSION_MIN` rises to v2, the `StateSyncUpsertV0` encoding is removed, and a peer still speaking v0 or v1 is rejected with `BadVersion`.
* Ref: [monad-bft PR #3211](https://github.com/category-labs/monad-bft/pull/3211), [monad (execution) PR #2487](https://github.com/category-labs/monad/pull/2487)
* **\[EVM]** EIP-7981 (increased access list cost) is implemented behind `eip_7981_active`, which is active only for EVM revisions at or above `MONAD_ETH_AMSTERDAM`. Not reachable on any current network.
* Ref: [monad (execution) PR #2490](https://github.com/category-labs/monad/pull/2490)
* **\[EVM]** `ethash` is replaced with an in-house `hash256` type and keccak implementation. This also corrects a `SHA3_squeeze` arity mismatch that produced a wrong digest for every input on non-x86\_64 builds.
* Ref: [monad (execution) PR #2507](https://github.com/category-labs/monad/pull/2507)
* **\[EVM]** `silkpre_recover_address` is replaced with `monad_recover_address`, and the vendored secp256k1 is linked directly.
* Ref: [monad (execution) PR #2520](https://github.com/category-labs/monad/pull/2520), [monad (execution) PR #2488](https://github.com/category-labs/monad/pull/2488)
* **\[Node ops]** Trie update statistics are made monotonic via a snapshot API.
* Ref: [monad (execution) PR #2502](https://github.com/category-labs/monad/pull/2502)
* **\[EVM]** The zkVM precompiles architecture is refactored.
* Ref: [monad (execution) PR #2209](https://github.com/category-labs/monad/pull/2209)
## v0.16.2
| Network | Date released | Comment |
| - | - | - |
| [`mainnet`](/developer-essentials/network-information) | 2026-09-10 | |
| [`testnet`](/developer-essentials/testnet) | 2026-09-03 | |
Tags or hashes:
* `monad-bft` (consensus): [tag `v0.16.2`](https://github.com/category-labs/monad-bft/releases/tag/v0.16.2) (`4374d389e`)
* `monad` (execution): [tag `v0.16.2+1`](https://github.com/category-labs/monad/releases/tag/v0.16.2%2B1) (`aae93c535`)
#### Highlights
* **Raptorcast v1 publish** — nodes now publish proposals in the v1 raptorcast wire format on both the primary and secondary paths.
* **JSON-RPC error codes corrected** across `eth_call`, `eth_estimateGas`, `eth_simulateV1`, `debug_*` and `txpool_*`.
* Raptorcast throughput improved \~16.7% under multi-target load.
#### Notable protocol changes
* **\[Consensus]** Raptorcast advances to the `accept_both_publish_v1` stage; nodes publish proposals in the v1 wire format on both primary and secondary paths.
* Ref: [monad-bft PR #3177](https://github.com/category-labs/monad-bft/pull/3177)
* **\[Consensus]** `AdvanceRound` is published to full nodes via broadcast rather than secondary raptorcast, avoiding a collision with the proposal commitment under v1.
* Ref: [monad-bft PR #3176](https://github.com/category-labs/monad-bft/pull/3176)
#### Notable RPC/SDK changes
* **\[RPC]** Fix JSON-RPC error codes and messages returned by the call, simulate, debug, txpool and websocket handlers.
* Ref: [monad-bft PR #3228](https://github.com/category-labs/monad-bft/pull/3228)
* **\[RPC]** Fix zero-fee `eth_call`s — a zero `maxFeePerGas` is no longer raised to the base fee, matching geth and reth.
* Ref: [monad-bft PR #3164](https://github.com/category-labs/monad-bft/pull/3164)
* **\[RPC]** Fix EIP-1898 compatibility for `BlockTagOrHash`.
* Ref: [monad-bft PR #3163](https://github.com/category-labs/monad-bft/pull/3163)
* **\[RPC]** `eth_createAccessList` now accepts state overrides.
* Ref: [monad-bft PR #3179](https://github.com/category-labs/monad-bft/pull/3179)
#### Notable robustness changes
* **\[Consensus]** A validator publishes only the first accepted proposal to its full nodes, so an equivocated proposal is no longer forwarded.
* Ref: [monad-bft PR #3180](https://github.com/category-labs/monad-bft/pull/3180)
* **\[RPC]** Concurrency limiter for `eth_feeHistory`, bounding memory on large block ranges.
* Ref: [monad-bft PR #3212](https://github.com/category-labs/monad-bft/pull/3212)
* **\[EVM]** Runloop fix for when the node resets to the start block number.
* Ref: [monad (execution) PR #2501](https://github.com/category-labs/monad/pull/2501)
#### Notable performance changes
* **\[Consensus]** Raptorcast avoids redundant wire-auth lookups in the authenticated send path — 15,796 to 18,427 chunks/s.
* Ref: [monad-bft PR #3223](https://github.com/category-labs/monad-bft/pull/3223)
#### Notable internal changes
* **\[Node ops]** Nodes can opt out of serving statesync requests. Optional `node.toml` setting, default unchanged.
* Ref: [monad-bft PR #3208](https://github.com/category-labs/monad-bft/pull/3208)
* **\[Node ops]** Update the `openssl` crate to 0.10.81, closing seven advisories. Reached only through `monad-rpc` with a MongoDB archive backend configured; `monad-node` does not link it.
* Ref: [monad-bft PR #3191](https://github.com/category-labs/monad-bft/pull/3191)
* **\[EVM]** Seed `Address`, `bytes32` and `StorageKey` hashing per process, so colliding keys cannot be precomputed against node-local maps.
* Ref: [monad (execution) PR #2462](https://github.com/category-labs/monad/pull/2462)
* **\[EVM]** Replace silkpre's ECRECOVER precompile with a vendored `monad_recover_address` on system libsecp256k1. Adds a `libsecp256k1-dev` build dependency outside the published Docker images.
* Ref: [monad (execution) PR #2437](https://github.com/category-labs/monad/pull/2437)
* **\[EVM]** Allow dual-db commit in `runloop_monad_ethblocks` where `secondary_db` is optional.
* Ref: cherry-pick from `staging-v0.16.1` (`df14e67bb`)
* **\[EVM]** Consolidate dual-db mirroring with `for_each_db`.
* Ref: cherry-pick from `staging-v0.16.1` (`d836afc18`)
## v0.16.1
| Network | Date released | Comment |
| - | - | - |
| [`mainnet`](/developer-essentials/network-information) | N/A | Required before MONAD\_TEN activation at 2026-09-02 14:30 UTC |
| [`testnet`](/developer-essentials/testnet) | N/A | |
Tags or hashes:
* `monad-bft` (consensus): [tag `v0.16.1`](https://github.com/category-labs/monad-bft/releases/tag/v0.16.1) (`12b7017d6`)
* `monad` (execution): [tag `v0.16.1`](https://github.com/category-labs/monad/releases/tag/v0.16.1) (`7279dfc7b`)
#### Highlights
* **MONAD\_TEN activation on mainnet** — MIP-8 (page-encoded storage) activates on mainnet at timestamp `1788359400` (2026-09-02 14:30 UTC). This is the mainnet counterpart to the testnet activation shipped in v0.16.0.
* **Page-encoded timeline now required on mainnet** — a mainnet node must present either a page-encoded primary (Phase C) or an active secondary timeline (Phase A/B dual-db), or it will fail to start.
* Dual-db commit support in the ethblocks runloop, allowing nodes still in Phase A/B to commit to both timelines.
#### Notable protocol changes
* **\[EVM]** Set the MONAD\_TEN activation timestamp for mainnet — `1788359400` (2026-09-02 14:30 UTC). MONAD\_NINE rules remain in effect below that timestamp.
* Ref: [monad (execution) PR #2489](https://github.com/category-labs/monad/pull/2489)
* **\[EVM]** Enforce the page-encoded timeline assertion on mainnet — previously testnet-only. Nodes that have not completed Phase A (dual-db activation) will fail to start. See [MIP-8 Activation and Page Storage Migration](/node-ops/upgrade-instructions/page-storage-mip-8-migration).
* Ref: [monad (execution) PR #2489](https://github.com/category-labs/monad/pull/2489)
#### Notable robustness changes
* **\[Consensus]** monad-dataplane: fall back gracefully when io\_uring buffer ring setup fails, rather than failing node startup.
* Ref: [monad-bft PR #3201](https://github.com/category-labs/monad-bft/pull/3201)
* **\[EVM]** Allow dual-db commit in `runloop_monad_ethblocks` where the secondary db is optional, so Phase A/B nodes commit to both timelines.
#### Notable internal changes
* **\[EVM]** Consolidate dual-db mirroring behind `for_each_db`, replacing duplicated commit paths in the runloop.
* **\[Consensus]** Fix the buffer-ring fallback build by removing a stale metrics argument.
## v0.16.0
| Network | Date released | Comment |
| - | - | - |
| [`mainnet`](/developer-essentials/network-information) | N/A | |
| [`testnet`](/developer-essentials/testnet) | 2026-08-06 | Adopted 2026-08-06 to 2026-08-08 |
Tags or hashes:
* `monad-bft` (consensus): [tag `v0.16.0`](https://github.com/category-labs/monad-bft/releases/tag/v0.16.0) (`c616743d1`)
* `monad` (execution): [tag `v0.16.0`](https://github.com/category-labs/monad/releases/tag/v0.16.0) (`e81ffe31c`)
#### Highlights
* **MONAD\_TEN activation** — MIP-8 (page-encoded storage) activates on testnet at timestamp `1786545000` (2026-08-12 14:30 UTC). Mainnet activation not yet set (staged rollout).
* Protocol-level change requiring a version bump from v0.15.x to v0.16.0.
* Robustness fixes, performance improvements, and internal refactors on top of v0.15.2.
#### Notable protocol changes
* **\[EVM]** Activate MONAD\_TEN — MIP-8 (page-encoded storage) activation on testnet (2026-08-12 14:30 UTC). Requires dual-db mode; nodes that have not completed Phase A will fail to start.
* Ref: [monad (execution) PR #2459](https://github.com/category-labs/monad/pull/2459)
#### Notable robustness changes
* **\[EVM]** Enforce page-encoded timeline assertion on testnet — nodes that have not completed Phase A (dual-db activation) will fail to start. See [MIP-8 Activation and Page Storage Migration](/node-ops/upgrade-instructions/page-storage-mip-8-migration). Ref: [monad (execution) PR #2475](https://github.com/category-labs/monad/pull/2475)
* **\[Consensus]** Reject storage keys over 32 bytes. Ref: [monad-bft PR #3160](https://github.com/category-labs/monad-bft/pull/3160)
* **\[Consensus]** Raptorcast: hardening secondary raptorcast client. Ref: [monad-bft PR #3157](https://github.com/category-labs/monad-bft/pull/3157)
* **\[EVM]** Throw on maximum code size exceeded; dispatch `MONAD_ASSERT_THROW` through `MONAD_THROW`. Ref: [monad (execution) PR #2415](https://github.com/category-labs/monad/pull/2415)
* **\[EVM]** mpt: bound promote target `primary_ring_idx` to a valid ring selector. Ref: [monad (execution) PR #2421](https://github.com/category-labs/monad/pull/2421)
#### Notable performance changes
* **\[EVM]** Tweak runtime `signextend` for better c프로젝트로 돌아가기