Linea 백서

Linea

원문

bitpro가 원문에서 글자만 모은 내용이에요. 표·그림·수식은 빠지거나 깨질 수 있어요. 전체 5쪽 중 3쪽

no access to neither goods nor services this information is not applicable. G.8 Utility tokens redemption Not applicable. G.9 Non-trading request The admission to trading is sought. G.10 Crypto-assets purchase or sale modalities Not applicable, as the admission to trading of the tokens is sought. FFG: DW1NCGR64 - 2025-10-02 30 G.11 Crypto-assets transfer restrictions The Token does not have any transfer restrictions and are generally freely transferable. Any Crypto Asset Service Providers that support the Token can impose their own restrictions in agreements they enter with their clients. The Crypto Asset Service Providers may impose restrictions on buyers and sellers of the Token in accordance with applicable laws, and their internal policies and terms. G.12 Supply adjustment protocols Yes. Although the Token minting contract is neither configured to or intended to mint any additional Tokens, the Network has implemented a Token burning mechanism as part of transactions on the Network in order to reduce supply over time. G.13 Supply adjustment mechanisms The Network mirrors the gas transaction fee mechanism utilized on the Ethereum protocol. All transaction fees on the Network are settled in ETH. Eighty (80) % of the ETH gas fee is automatically converted into the Token and burned through a pre-programmed mechanism embedded in the protocol, which executes autonomously and without manual intervention. G.14 Token value protection schemes No, the token does not have value protection schemes. G.15 Token value protection schemes description Not applicable. G.16 Compensation schemes No, the token does not have compensation schemes. G.17 Compensation schemes description Not applicable. FFG: DW1NCGR64 - 2025-10-02 31 G.18 Applicable law Applicable law likely depends on the location of any particular transaction with the token. G.19 Competent court Competent court likely depends on the location of any particular transaction with the Token. Part H – information on the underlying technology H.1 Distributed ledger technology (DTL) See F.13. H.2 Protocols and technical standards The Token is available on two DLT networks: Linea and Ethereum. In general, when evaluating crypto assets, the total number of tokens issued across different networks must always be taken into account, as spillover effects can be adverse for investors. The following applies to the Token and the Network: Linea is a “Layer 2” which uses rollup technology, whereby multiple transactions are aggregated (“rolled up”) and submitted in batches to Ethereum (described further below) for final settlement. A single sequencer is responsible for ordering transactions on the Network. The sequencer collects user-submitted transactions, orders them, and produces Layer 2 blocks. The correctness of Layer 2 state transitions is ensured through a single prover mechanism. The prover generates cryptographic proofs (validity proofs or fraud proofs, depending on the rollup type) demonstrating that the state transitions executed off-chain are consistent with the Ethereum smart contracts governing the rollup. These proofs are submitted to Ethereum for verification, ensuring that malicious or incorrect state transitions cannot be finalized on the base layer. FFG: DW1NCGR64 - 2025-10-02 32 The Network is fully interoperable with Ethereum. Users deposit and withdraw assets via Ethereum smart contracts, and transactions on the Network ultimately derive their security from Ethereum’s consensus mechanism. Future upgrades may extend interoperability to other Layer 2 solutions or blockchains. The following applies to Ethereum: The Ethereum network operates on a well-defined set of protocols and technical standards that are intended to ensure its security, decentralization, and functionality. Below are some of the key ones: 1. Network Protocol Ethereum follows a decentralized, peer-to-peer (P2P) protocol where nodes communicate over the crypto-asset's DevP2P protocol using RLPx for data encoding. - Transactions and smart contract execution are secured through Proof-of-Stake (PoS) consensus. - Validators propose and attest blocks in Ethereum’s Beacon Chain, finalized through Casper FFG. - The Ethereum Virtual Machine (EVM) executes smart contracts using Turing-complete bytecode. 2. Transaction and Address Standards Address Format: 20-byte addresses derived from Keccak-256 hashing of public keys. Transaction Types: - Legacy Transactions (pre-EIP-1559) - Type 0 (Pre-EIP-1559 transactions) - Type 1 (EIP-2930: Access list transactions) - Type 2 (EIP-1559: Dynamic fee transactions with base fee burning) FFG: DW1NCGR64 - 2025-10-02 33 The Pectra upgrade introduces EIP-7702, a transformative improvement to account abstraction. This allows externally owned accounts (EOAs) to temporarily act as smart contract wallets during a transaction. It provides significant flexibility, enabling functionality such as sponsored gas payments and batched operations without changing the underlying account model permanently. 3. Blockchain Data Structure & Block Standards - Ethereum consists of accounts, smart contracts, and storage states, maintained through Merkle Patricia Trees for efficient verification. Each block contains: - Block Header: Parent hash, state root, transactions root, receipts root, timestamp, gas limit, gas used, proposer signature. - Transactions: Smart contract executions and token transfers. - Block Size: No fixed limit; constrained by the gas limit per block (variable over time). In line with Ethereum’s scalability roadmap, Pectra includes EIP-7691, which increases the maximum number of "blobs" (data chunks introduced with EIP-4844) per block. This change significantly boosts the data availability layer used by rollups, supporting cheaper and more efficient Layer 2 scalability. 4. Upgrade & Improvement Standards Ethereum follows the Ethereum Improvement Proposal (EIP) process for upgrades. H.3 Technology used The Token is available on two DLT networks: Linea and Ethereum. In general, when evaluating crypto assets, the total number of tokens issued across different networks must always be taken into account, as spillover effects can be adverse for investors. The following applies to the Token and the Network: The LINEA protocol is a Type 2 Zero-Knowledge Ethereum Virtual Machine (zkEVM) network that aims to scale Ethereum while preserving its security and developer experience. The Network is designed for full EVM equivalence at the bytecode level, FFG: DW1NCGR64 - 2025-10-02 34 which is a critical standard for seamless interoperability. As a zk-rollup, the Network utilizes zero-knowledge proofs (ZKPs) to ensure the integrity of off-chain transactions. The Network uses a custom, in-house proving system based on recursive SNARKs, with components named Arcane and Vortex. This system is used to generate validity proofs that confirm off-chain computations are correct. The Network uses lattice-based cryptography for its ZKPs, which offers resistance to potential threats from quantum computing. The Network’s off-chain execution environment uses data structures that mirror Ethereum's own state management. The Network uses a Merkle-Patricia Trie to record the world state and manage consensus, just as Ethereum does. To improve efficiency in tracking and updating account storage, LINEA protocol uses a sparse Merkle tree. The following applies to Ethereum: 1. Decentralized Ledger: The Ethereum blockchain acts as a decentralized ledger for all token transactions, with the intention to preserving an unalterable record of token transfers and ownership to ensure both transparency and security. 2. Private Key Management: To safeguard their token holdings, users must securely store their wallet’s private keys and recovery phrases. 3. Cryptographic Integrity: Ethereum employs elliptic curve cryptography to validate and execute transactions securely, intended to ensure the integrity of all transfers. The Keccak-256 (SHA-3 variant) Hashing Algorithm is used for hashing and address generation. The crypto-asset uses ECDSA with secp256k1 curve for key generation and digital signatures. Next to that, BLS (Boneh-Lynn-Shacham) signatures are used for validator aggregation in PoS. H.4 Consensus mechanism The crypto asset that is the subject of this white paper is available on multiple DLT networks. These include: Linea and Ethereum. In general, when evaluating crypto assets, the total number of tokens issued across different networks must always be taken into account, as spillover effects can be adverse for investors. The following applies to the Token and the Network: FFG: DW1NCGR64 - 2025-10-02 35 The Linea Network uses a Zero-Knowledge Rollup (ZK-Rollup) architecture with a zkEVM for Ethereum compatibility, and its consensus is derived from Ethereum's own proof-of-stake security. While the Network has components like a sequencer for ordering transactions and a coordinator for network management, its consensus mechanism is fundamentally linked to the proof and verification process of zero-knowledge proofs and the security of the Ethereum mainnet. Instead of a typical decentralized consensus on a separate blockchain, the Network inherits its security and state finality from Ethereum. The following applies to Ethereum: Ethereum's Proof-of-Stake (PoS) consensus mechanism, introduced via a protocol change known as “The Merge” in 2022, replaced mining with validator staking. Validators must stake at least 32 ETH, and every block a validator is randomly chosen to propose the next block. Once proposed by the chosen validator, the other validators verify the block’s integrity. The Ethereum network operates on a slot and epoch system, where a new block is proposed every 12 seconds, and finalization occurs after two epochs (~12.8 minutes) using Casper-FFG. The “Beacon Chain” coordinates validators, while the fork-choice rule (LMD-GHOST) ensures the chain follows the heaviest accumulated validator votes. Validators earn rewards for proposing and verifying blocks, but face slashing for malicious behavior or inactivity. PoS aims to improve energy efficiency, security, and scalability, with future upgrades like Proto-Danksharding enhancing transaction efficiency. H.5 Incentive mechanisms and applicable fees The Token is available on two DLT networks: Linea and Ethereum. In general, when evaluating crypto assets, the total number of tokens issued across different networks must always be taken into account, as spillover effects can be adverse for investors. The following applies to the Token and the Network: Like Ethereum, the Network uses a gas system, where gas is the unit of computational effort required to process a transaction. All gas fees on the Network are paid in Ether (ETH). The Network has a base fee that is designed to stabilize at 7 wei. The base fee still FFG: DW1NCGR64 - 2025-10-02 36 decreases or increases based on network traffic, similar to Ethereum, but it does not go below 7 wei. The Network does not require Token staking for transaction validation purposes and thus provides no staking rewards. It does not offer incentives for running a full network node. It does charge fees collected by the sequencer for transaction processing. Those fees are paid in ETH, 20% of which are immediately burned while the remaining 80% are converted to Tokens and then burned. The following applies to Ethereum: The crypto-asset's PoS system secures transactions through validator incentives and economic penalties. Validators stake at least 32 ETH and earn rewards for proposing blocks, attesting to valid ones, and participating in sync committees. Rewards are paid in newly issued ETH and transaction fees. Under EIP-1559, transaction fees consist of a base fee, which is burned to reduce supply, and an optional priority fee (tip) paid to validators. Validators face slashing if they act maliciously and incur penalties for inactivity. This system aims to increase security by aligning incentives while making the crypto-asset's fee structure more predictable and deflationary during high network activity. H.6 Use of distributed ledger technology False H.7 DLT functionality description Not applicable. H.8 Audit As we are understanding the question relating to "technology" to be interpreted in a broad sense, the answer to whether an audit of "the technology used" was conducted is "no, we cannot guarantee, that all parts of the technology used have been audited". However, certain smart contracts associated with the Network, including the Token smart contract, were subjected to one or more security audits, the scope and outcomes of which are detailed here: FFG: DW1NCGR64 - 2025-10-02 37 https://github.com/Consensys/linea-monorepo/blob/f966a2d020d3ae4f909e0a5c40 b7990eaf4d20f8/docs/audits.md#linea-tokens-and-airdrop-smart-contract-audits . H.9 Audit outcome Please see H.8 for the website address that contains the outcomes of the audits performed. Part I – Information on risks I.1 Offer-related risks 1. Regulatory and Compliance This white paper has been prepared with utmost caution; however, uncertainties in the regulatory requirements and future changes in regulatory frameworks could potentially impact the Token's legal status and its tradability. There is also a high probability that other laws will come into force, changing the rules for the trading of the Token. Therefore, such developments shall be monitored and acted upon accordingly. 2. Operational and Technical Blockchain Dependency: The Token is entirely dependent on the Ethereum network in order to operate properly, and on the LINEA protocol. Any issues, such as downtime, congestion, or security vulnerabilities within the Ethereum network or the LINEA protocol, could adversely affect the Token's functionality. Smart Contract Risks: Smart contracts governing the Token may contain hidden vulnerabilities or bugs that could disrupt the Token offering or distribution processes. Connection Dependency: As the trading of the Token also involves trading venues which are independent of the Association and the Consortium, technical risks such as downtime of the connection or faulty code are also possible. Human errors: Due to the irrevocability of blockchain-transactions, approving wrong transactions or using incorrect networks/addresses will most likely result in Tokens and/or other funds becoming irrevocably inaccessible. FFG: DW1NCGR64 - 2025-10-02 38 Custodial risk: Holding the Token in broad terms can be carried out by an owner of the Token in one of two ways: (1) via self-custody; and (2) via an account with a trading platform or other custodian to hold the Token on the owner’s behalf. In both cases there is a risk of loss of the Token as a result of hacks, social engineering, account takeovers and other malicious activity, as well as from system failures. Events of this nature can lead to a total loss of the Token. 3. Market and Liquidity Volatility: The Token will most likely be subject to high volatility and market speculation. Price fluctuations could be significant, posing a risk of substantial losses to holders. Liquidity Risk: Liquidity is contingent upon trading activity levels on decentralized exchanges (DEXs) and potentially on centralized exchanges (CEXs), should they admit the Token to trading. Low trading volumes may restrict or prevent users from being able to buy or sell Tokens. 4. Counterparty As the admission to trading involves the listing of the Token by trading venues, counterparty risks arise. These include, but are not limited to, the following risks: General Trading Platform Risk: There is a risk of trading platforms not operating to the highest standards. Examples like FTX show that especially in nascent industries, compliance and oversight-frameworks might not be fully established and/or enforced. Listing or Delisting Risks: The listing or delisting of the Token is subject to the trading partners’ internal processes. Delisting of the Token at supporting trading partners could harm or completely halt the ability to trade the Token. 5. Liquidity Liquidity of the Token can vary, especially when trading activity is limited. This could result in high slippage when trading a Token. FFG: DW1NCGR64 - 2025-10-02 39 6. Failure of one or more Counterparties Bankruptcy Risk: Counterparties could go bankrupt, possibly resulting in a total loss for clients who hold Tokens at that counterparty. 7. Information asymmetry Different groups of participants may not have the same access to technical details or governance information, leading to uneven decision-making and potential disadvantages for less informed investors. I.2 Issuer-related risks 1. Insolvency As with every other commercial endeavor, the risk of insolvency of the issuer is a potential. This could be caused by, but is not limited to, lack of interest from the public, lack of funding, incapacitation of key developers and project members, force majeure (including pandemics and wars) or lack of commercial success or prospects. 2. Counterparty In order to operate, the issuer has most likely engaged in different business relationships with one or more third parties on which it strongly depends on. Loss or changes in the leadership or key partners of the issuer and/or the respective counterparties can lead to disruptions, loss of trust, or project failure. This could result in a total loss of economic value for the crypto-asset holders. 3. Legal and Regulatory Compliance Cryptocurrencies and blockchain-based
프로젝트로 돌아가기