Geodnet 백서

Geodnet

원문

bitpro가 원문에서 글자만 모은 내용이에요. 표·그림·수식은 빠지거나 깨질 수 있어요. 전체 3쪽 중 2쪽

ed for POA), a tvalidation value of 20 ms is initially proposed and can be changed as an algorithm parameter by the GeoDAO. The validator nodes are selected to be proximal to the miners, which can be achieved by geographic location or by simply minimizing communication latency (i.e., “ping”) times. Note that the validated location check does not validate the physical location of the miner node, but rather the location of its antenna; thus, a data retransmission is considered valid for the original antenna location and does not negatively affect the quality of the network, as long as the latency is not excessive. The validation message checks are combined with differential pseudorange and carrier phase analysis as part of the POL protocol. This approach limits observation errors if a sophisticated attack based on the security code and estimation replay is attempted (Psiaki et al., 2016). While this class of attack can be successfully per - formed with latencies < 1 ms using custom hardware/software, the costs will out - weigh the mining rewards. Any attacker generating invalid data for any reason will be detected based on differential analysis with nearby miner nodes, performed by validation nodes, including spoofing attacks against the network. 5.4  Proof of Accuracy (POA) Validated GNSS miners are rewarded in proportion to the following formula: Q = BWMNTSL Q: POA metric B: Base reward set by the token supply generation rate W: 0–1.0 discount factor accounting for sharing rewards with neighbors within a 20-km square, with heavier weighting for earlier miners M: Reward multiplier based on the number of independent bands observed divided by 6 (such that M = 1 for 6 tracked bands) N: 0–1.0 linear scaling factor corresponding to the bounded range of 10–30 satel - lites with C/N0 > 40 dB-Hz T: 0–1.0 exponential scaling factor corresponding to the bounded range of 50%– 100% uptime FIGURE 3  POL validation messages     HORTON et al. S: 0–1.0 linear scaling factor corresponding to the bounded range of 2-10cm of esti- mated position shift L: 0–1.0 linear scaling factor corresponding to a bounded range of 1-5cm of latency These parameters are computed by a validator node, which is described later, with the results stored publicly on the GEODNET blockchain. The parameters may be updated from time to time as the network grows, and additional metrics may be added to the POA rubric. Miners within 10 m of each other are treated as a single miner and are rewarded as such. Incentive programs may increase the base rewards in a specific region to attract miners to low-density areas. POA is actively used to reward GEODNET miners. Deposit transactions occur daily and can be viewed at the GEODNET Polygon network SmartContract address: 0xAC0F66379A6d7801D7726d5a943356A172549Adb. Finally, GEODNET uses a PPP processing pipeline to validate and maintain each miner’s coordinates with third-party services such as NRCAN as well as internally developed tools. 5.5  Genesis Miners To bootstrap the global development of the GEODNET network, a global net - work of more than 40 survey-grade GNSS stations has been installed, with a tar - get of 100 stations prior to the end of 2022. Figure 4 shows the installation as of September 2021. The locations of these genesis miner stations are evenly spread over the surface of the Earth, providing a baseline network capability to produce the data products necessary for PPP and PPP-AR algorithms. PPP’s global capabil- ity bootstraps the functionality of the network at a global level. 6  NETWORK ARCHITECTURE The GEODNET network consists of space weather miners, validator nodes, and service provider nodes, as shown in Figure 5. Service provider nodes face the end-user and utilize the blockchain to select which miner stream or combination of streams to utilize. Validators are internet-connected instances that are staked with the GEOD token and participate in a POS consensus protocol to validate GEODNET block - chain transactions. In the initial phase, the number of validator nodes will be limited to 64, with a minimum of 20 to launch the main net. When a new space FIGURE 4  Genesis miners HORTON et al. weather miner first connects, it will communicate with a validator boot node. The validator boot node will assign the miner to a primary validator. If the assigned validator leaves the network, the process repeats. After the validator confirms the miner’s security certificate, the miner begins signed data transmission and the initial validation process. After the initial validation is complete, the valida - tor continues to receive POL validation messages and requests observation data from the miner at random intervals to compute the POA. The consensus protocol determines which node generates a new block at a particular time point. If a miner provides fake or inaccurate data, it will be detected, and the proof will be included in the block. 6.1  Proof of Stake (POS) POS is a consensus protocol that has been widely used in recent blockchain proj- ects as an alternative to POW. POS is more energy efficient than POW and can provide improved security. Token owners put up tokens as collateral in exchange for the opportunity to participate in blockchain validation operations, for which additional tokens may be earned as rewards. In GEODNET, validator nodes stake tokens to participate in system consensus, which is required to add new blocks to the blockchain. Each validator node will have an opportunity to produce blocks based on the Boneh–Lynn–Shacham (BLS) signature verification algorithm, weighted by the staked token proportion. GEODNET uses the BLS algorithm for fast and reliable Byzantine-fault-tolerant-like consensus (Sousa et al., 2018). Multiple parties use a threshold signature to reach an agreement on a blockchain proposal. The staking will also improve economic security by punishing any misbehaving validators through a loss of staked tokens. Anyone who owns GEODNET tokens can bond (or delegate) their GEOD tokens and become a validator, making the validator set open and permissionless. 6.2  Service Provider Node Software Stack The service provider runs a GeoDAO-provided stack written for the node, includ- ing several libraries and application programming interfaces (APIs) to interact with the blockchain and receive real-time data streams from miners. These libraries and APIs are extendable by the operator of a service provider node and include hooks to connect code written in other programming languages. As of September 2022, this stack is centralized and run by the GeoDAO Foundation. During 2023, the stack is planned to be decentralized via validator nodes, with significant portions FIGURE 5  GEODNET architecture: Miners, validators, and service providers     HORTON et al. open-sourced. The service provider nodes may output a variety of data products including the following: • Reliable daily and hourly receiver independent exchange format (RINEX) files for select stations • Network RTK corrections (RTCM) for real-time RTK via NTRIP • Precise clock, orbit, and localized ionospheric corrections for PPP-AR via NTRIP Testing of proposed network data products has already begun, and current per - formance results were presented by the GeoDAO Foundation at the ION GNSS+ 2022 conference (Horton et al., 2022). Presented data included the following: • Comparison of GPS orbit accuracy with IGS data, where data were processed with Geoscience Australia GINAN software using exclusively GEODNET station data • Local RTK results between various neighboring GEODNET stations processed with RTKlib 2.4.3 • Accuracy results obtained by NRCAN and TEQC analysis of station quality While the GEODNET network has not yet entered full operational function, early results show that its performance is consistent with that of traditional cen - tralized networks. 6.3  Validator Node Software Stack The validator will run an open-source GeoDAO-maintained stack that will fully decentralize the operation of the blockchain. The GEODNET blockchain provides benefits over existing POW and POS protocols alone. Most POW blockchain systems only offer probabilistic finality. Probabilistic finality refers to the fact that, theoretically, some nodes with overwhelmingly high computation power can build an alternative branch and eventually replace the original branch. Additionally, POW consumes a high level of energy to perform a brute-force search for the required hash function input (Xiao et al., 2019). POS is a consensus protocol that uses stakes as the criteria to vote on new block generation. Unlike POW, POS is a closed system, which means tokens are created without any external entropy. Thus, the POS system will likely suffer from cen - tralization in the initial token distribution and reward system. Another drawback of the POS consensus protocol is that the POS system itself can be easily cloned, resulting in an unlimited token supply (Nguyen et al., 2019). GEODNET takes an approach that merges the desired features of POW and POS. External resource consumption (external entropy) is critical to the system’s security and decentralization. However, instead of using unbounded energy consumption as in Bitcoin or most other POW protocols, GEODNET uses geospatial information as the unique and unforgeable resource to include in the consensus process. The GEODNET consensus protocol uses both geospatial data input (POL, POA) and staked tokens (POS) to efficiently determine block generation. In this way, GEODNET will be the first and only network to utilize limited Earth surface as a resource, which provides enormous value for the network. Additional services such as localization, high-definition mapping, and autonomous naviga - tion are simply natural derivatives of this network. HORTON et al. 7  GEODAO AND CURRENT STATUS The GeoDAO Foundation is the DAO that governs the GEODNET network. 7.1  Organization A DAO is best described as an effective and safe way to operate a project with a set of individuals around the globe. The GeoDAO Foundation is an organiza - tion dedicated to a decentralized blockchain-based network of environmental and space weather collection stations for utilization by the geospatial community and industry. GeoDAO is organized around an ERC20 SmartContract (Ethereum, 2023), a piece of code that describes the creation and distribution of native GEOD tokens. The GEODNET SmartContract is registered on the Polygon public blockchain, peg- ging the GeoDAO and the token distribution logic into a well-established public chain that is currently used by companies such as Starbucks. As the GEODNET software stack matures, operations will be transitioned onto a separate blockchain to more fully decentralize the network. Decisions regarding the GeoDAO can be executed by the blockchain SmartContracts, based on token holder “votes.” The GEODNET Polygon SmartContract address is 0xAC0F66379A6d7801D7726d5a943356A172549Adb. 7.2  Token Supply The total token supply growth rate halves every two years. The dependence of the token supply over time t can be written as follows: M(t) = M0 + ∫ I0 ∗ exp[−ln2 ∗ (t/T)]dt + ∫ (m(t) + Δ(t))dt Here, M0 is the initial token supply. The first integration term is the staking reward in terms of time t, and the second integration term is the mining reward. The number of base stations as a function of time is m(t), and Δ(t) is the expected miner growth. 7.3  Software Development GeoDAO developers will deliver a baseline set of open infrastructure necessary to bootstrap the community. These deliverables include initial miner reference designs, validator and service provider reference code, and user-facing tools. User-facing tools include the GEODNET website, a user-facing web console application, and a mobile GEOD wallet application with miner registration fea - tures. GeoDAO will contribute other tools as the need arises. 7.4  Current Status As of January 2023, i.e., less than one year since the launch of GEODNET, the network has grown to over 1700 deployed stations, and approximately 2500 sta - tions have been delivered for installation. By the end of 2022, it is anticipated     HORTON et al. that there will be three certified GNSS manufacturers producing GEODNET mining hardware. Community interest in this network has been consistent and growing since the original presentation at the ION GNSS+ 2021 conference (Horton et al., 2021). Real-world testing of the GNSS correction network for agriculture machine control and civil survey is ongoing at several locations. A real-time deployment map of GEODNET CORS stations can be found at https:// console.geodnet.com , and a snapshot image is shown in Figure 6. Recent test results from GEODNET were presented at the ION GNSS+ 2022 conference (Horton et al., 2022). 8  APPLICATIONS A public, secure, dense global reference station network will transform numer - ous scientific and commercial applications. 8.1  Climate Monitoring High-accuracy geodetic position data from dense and diverse global locations help scientists predict the effects of rising sea levels and changing precipitation patterns. Monitoring of shoreline changes, forest fire threats, desertification, and air quality have all utilized data from existing CORS networks (Yao et al., 2017; Goncalves et al., 2017; Knight et al., 2020). 8.2  GNSS Spoofing and Jamming Detection The European GNSS Agency estimates that the global installed base of GNSS receivers is 6.5B units; however, commercial GNSS receivers are easily spoofed and jammed. In the United States, 14 of 16 critical infrastructures depend on GPS (USTTI Report, 2012). Current consumer receivers provide little to no protection against well-documented attacks utilizing easily acquired low-cost hardware. A dense network of secure GNSS receivers can provide an important alert and warn- ing capability against localized GNSS attacks (GSA, 2019). FIGURE 6  GEODNET station map, January 2023 HORTON et al. 8.3  Geodeformation Hazard Warning According to the EU Commission on Science, more than one in three people live in areas exposed to earthquakes. While GEODNET cannot prevent earthquakes or other natural geohazards such as sink-holes and landslides, accurate real-time data help in predicting disasters and identifying at-risk infrastructure (Lin et al., 2021; Pesaresi et al., 2019). 8.4  Precise Positioning and Timing Many of the existing networks of GNSS receivers are maintained to enable precise positioning and timing services on rover devices. Trimble and numer - ous other companies have supplied receivers used for survey, farming, and other precise geographic information system applications for more than 20 years. Both the rover receiver and GNSS data correction services for these appli - cations have traditionally been quite expensive; however, a great deal of enthu - siasm has recently emerged for lower-cost rovers for autonomous automobiles, drones, and even mobile phone applications. These applications are driving a growing need for low-cost highly available correction streams. A large decen - tralized network can meet this need with secured global data at a fraction of the cost of alternatives. 9  NEXT STEPS AND ROADMAP The GEODNET architecture was first introduced at the ION GNSS+ 2021 con - ference (Horton et al., 2021), and the initial response has been favorable. The GEODNET network is growing, with additional stations coming online every day. The goals for initial public operational service in February 2023, fully qualified data products by the end of 2023, and 100,000 online stations within three years are highlighted in Table 1. GEODNET ( https://geodnet.com) regularly posts new information regarding project status and provides links to additional resources. TABLE 1 Completed and Anticipated GEODNET Milestones Date Milestones Event Description Miners 2022.1 Testnet launch Initial token distribution and test net running 100 2022.6 Mainnet GeoDAO created, SmartContract issued, token rewards initiated, private tests of GEODNET data products started 500 2023.2 Service provider launch GEODNET data products publicly available 2,500 2024.1 Mainnet 2 GEODNET fully operational 30,000 2025.1 Global RTK available RTK on-demand globally, largest single network worldwide 100,000     HORTON et al. 10  CONCLUSION Decentralized infrastructure promises a scalable and rewarding way to enable high-precision measurements at Earth scale. GEODNET has proposed and is currently implementing an approach for building, running, and maintaining this decentralized infrastructure by utilizing ideas and technologies successfully demonstrated by innovative projects in the blockchain space over the past decade. Compared with the current sources for GNSS measurement data, GEODNET will allow participation in this valuable area by many more people (both as providers and users), with a relative benefit over the current state, particularly in developing and underserved areas. The GEODNET team has been excited to see the interest in and early growth of the project to date and looks forward to continuing to grow and improve the network with a global community. references Estey, H. L., & Meertens, C. M. (1999). TEQC: The multi-purpose toolkit for GPS/GLONASS data. GPS Solutions, 3(1), 42–49. https://doi.org/10.1007/PL00012778 Ethereum Foundation. (2023). ERC-20 Token Standard. https://ethereum.org/en/developers/ docs/standards/tokens/erc-20/ Gakstatter, E. (2014). Finally, a list of public RTK base stations in the U.S. GPS World. https://www. gpsworld.com/finally-a-list-of-public-rtk-base-stations-in-the-u-s/ Goncalves, R., & Wange, J. (2017). Three most widely used GNSS-based shoreline monitoring methods to support integrated coastal zone management policies. Journal of Surveying Engineering, 143(3), 05017003. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000219 GSA. (2019). GNSS market report (issue 6). https://www.euspa.europa.eu/gnss-market-report- issue-6-october-2019 Haleem, A., Allen, A., Thompson, A., Nijdam, M., & Garg, R. (2018). Helium: A decentralized wireless network. Helium Systems, Inc. http://whitepaper.helium.com/ Horton, M., Wen, X., & Yi, Y. (2021). Blockchain for CORS networks. Proc. of the 34th International Technical Meeting of the Satellite Division of the Institute of Navigation (ION GNSS+ 2021), St. Louis, MO. 290–310. https://doi.org/10.33012/2021.17882 Horton, M., Chen, D., & Yi, Y. (2022). GEODNET: Secure geo-spatial infrastructure & service for business and metaverse. Proc. of the 35th International Technical Meeting of the Satellite Division of the Institute of Navigation (ION GNSS+ 2022), Denver, CO. https://www.ion.org/ gnss/virtual-abstract-view.cfm?paperID=11439 Jakowski, N., Mayer, C., Borries, C., & Wilken, V. (2009). Space weather monitoring by ground and space based GNSS measurements. Proc. of the 2009 International Technical Meeting of the Institute of Navigation , Anaheim, CA. 729–735. https://www.ion.org/publications/abstract. cfm?articleID=8353 Knight, P., Plater, A., Bird, C., & Sinclair, A. (2020). A low-cost GNSS buoy platform for measuring coastal sea levels. Ocean Engineering, 203, 107198. https://doi.org/10.1016/j. oceaneng.2020.107198 Lin, J., Melgar, D., & Searcy, T. (2021). Early warning for great earthquakes from characterization of crustal deformation patterns with deep learning. JGR Solid Earth, 126(10), e2021JB022703. https://doi.org/10.1029/2021JB022703 Nguyen, C., Hoang, D., Nguyen, D., Niyato, D., Nguyen, H., & Dutkiewice, E. (2019). Proof-of- stake consensus mechanisms for future blockchain networks: fundamentals, applications and opportunities. IEEE Access, 7, 85727–85745. https://doi.org/10.1109/ACCESS.2019.2925010 Pesaresi, M., Ehrlich, D., Kemper, T., Siragusa, A., Florc
프로젝트로 돌아가기